Click Rail Pro Picture Rail + FREE Fastener Kit

How much weight can Click Rail Pro picture rail hold?

Up to 50 kg per metre when fixed with the supplied Click & Connect clips on brick, concrete or timber-stud walls.

Can I cut Click Rail Pro picture rails to custom lengths?

Yes, you can cut the Click Rail Pro to custom lengths using a hacksaw, a fine-tooth mitre saw blade, or a drop saw. Deburr the edges for a clean finish.

How to Install the Click Rail Pro Picture Rail?

Mark a straight line along your wall using a laser level, chalk line, or the rail itself. Allow 3 Click & Connect clips per metre—so 6 for a 2 m rail and 9 for a 3 m rail. Fix the Click & Connect clips along the line, then click the rail firmly into place using your fist or a rubber mallet. When joining two rails, use one clip to span the join: position the end of each rail over half the clip so it acts as both a fastener and a joiner. Ensure each clip locks in securely for a clean, flush finish.

What’s in the free fastener kit?

The free fastener kit includes all the Click & Connect clips, plugs, screws, and end caps you need for your rails. It’s a built-in saving—worth $9.52 for a 2 m rail and $14.31 for a 3 m rail.

Can Click Rail Pro sit flush under cornices?

Yes, Click Rail Pro can sit flush under cornices, but since cornices are rarely perfectly straight, start by finding the lowest point. Use the rail itself, a chalk line, or a laser level to mark a straight reference line. Install your Click & Connect clips along that line, (3 per metre) then click the rail into place using your fist or a rubber mallet. Confirm that it connects firmly with each clip.

Is the white rail ready to use, or can I paint it?

You can use it as it is – it is a cold white that matches typical ceiling paint. But if you prefer, you can paint over it with any interior wall paint, as it is primed, so it blends in seamlessly with your space.

Is Click Rail Pro picture rail suitable for gyprock, brick or concrete walls?

Absolutely. For gyprock use a stud finder.  Drill 6 mm pilot holes, insert the masonry plugs provided and screw the click & connect clips flush. Use toggle anchors for hollow walls.

Is this suitable for renters?

Yes, the Click Rail Pro is perfect for commercial and residential rental—it keeps the landlord’s walls pristine while allowing tenants to hang and rearrange artwork freely, without screws, holes, or damage.

What is the difference between Click Rail and Click Rail Pro?

Click Rail Pro has a deeper profile than the standard Click Rail, giving you two mounting options: flange down to hide wire tips, or flange up to sit closer to the ceiling. It supports up to 50 kg per metre, ideal for heavier artworks. Click Rail holds up to 30 kg per metre.