🔍
Two white ArtiTeq tilt reducers shown in a front-facing product render on a light background.
Comparison photo of two framed artworks, with the left frame tilting forward without a tilt reducer and the right frame sitting flatter with one.
Close-up photo of a white ArtiTeq tilt reducer held between fingers, with screws and a second reducer blurred in the background.
ArtiTeq tilt reducer behind a frame, with its lower lip braced under the underside of the top frame section and arrows showing positioning.
Rear view of a timber frame with two ArtiTeq tilt reducers at the top corners and Micro Grip hooks slid into Frame Hangers for timber.
Close-up render of an ArtiTeq tilt reducer fixed behind a frame, with its lower lip bracing under the underside of the top section of the frame while a screwdriver tightens the screw.
Angled render of an ArtiTeq tilt reducer with dimensions marked as 29 mm long, 11 mm high and 5 mm deep.
Close-up render of an ArtiTeq tilt reducer mounted behind the top edge of a frame above a black hanging hook on a clear wire
  1. Two white ArtiTeq tilt reducers shown in a front-facing product render on a light background.
  2. Comparison photo of two framed artworks, with the left frame tilting forward without a tilt reducer and the right frame sitting flatter with one.
  3. Close-up photo of a white ArtiTeq tilt reducer held between fingers, with screws and a second reducer blurred in the background.
  4. ArtiTeq tilt reducer behind a frame, with its lower lip braced under the underside of the top frame section and arrows showing positioning.
  5. Rear view of a timber frame with two ArtiTeq tilt reducers at the top corners and Micro Grip hooks slid into Frame Hangers for timber.
  6. Close-up render of an ArtiTeq tilt reducer fixed behind a frame, with its lower lip bracing under the underside of the top section of the frame while a screwdriver tightens the screw.
  7. Angled render of an ArtiTeq tilt reducer with dimensions marked as 29 mm long, 11 mm high and 5 mm deep.
  8. Close-up render of an ArtiTeq tilt reducer mounted behind the top edge of a frame above a black hanging hook on a clear wire

Tilt Reducer

$0.77

Tilt Reducer – keep small frames flat (reduce forward tilt)

The Tilt Reducer helps reduce forward tilt (tilt down) so smaller artworks hang flatter against the wall.
Even on larger artworks, if they are light canvases, you may notice forward tilt (tilt down, forward leaning), where the top edge leans away from the wall.

The Tilt Reducer is designed by ArtiTeq to reduce this. It sits discreetly behind the artwork and helps the piece hang flatter against the wall.

Key benefits

  • Sits behind the artwork (not visible from the front)
  • Reduces forward tilt, especially on smaller or lighter frames
  • Compatible with 1 mm and 2 mm hanging wires

How Tilt Reducers work

Attach the Tilt Reducers to the top back edge of the frame with the lower lip braced under the underside of the top frame section, then guide the wire down below.
They create a stable contact point and help keep the hanging point closer to the wall, so the artwork sits flatter and tilts less.

Frame suitability

Works best on frames with a backing/profile of at least:

  • 10 mm height
  • 12 mm thickness

How to use it

Watch the quick how-to video here:
Tilt Reducer video

Still getting forward tilt?

Forward tilt can also be improved by using D-rings (not wire), placing them high, and adding frame spacers.
See our FAQ:
How to Reduce Forward Tilt (Tilt Down) When Hanging Art

Rail Installation Video

<h2>Tilt Reducer – reduce forward tilt (tilt down)</h2>

<p>The Tilt Reducer helps reduce forward tilt (tilt down) so smaller artworks hang flatter against the wall. It can be used with 1 mm and 2 mm hanging wires and sits discreetly behind the frame.</p>

<p>Still seeing tilt? See our FAQ on <a href=”PASTE-YOUR-FAQ-URL-HERE”>how to reduce forward tilt (tilt down)</a> using D-rings (not wire), high placement, spacers and more.</p>

<p>Watch the how-to video here: <a href=”https://www.youtube.com/watch?v=3Qo5i6-KjYQ&amp;t=5s” target=”_blank” rel=”noopener”>Tilt Reducer video</a>.</p>

Hang Logic Google Reviews

Preferred worldwide by builders, architects, and professionals.

Top rated
Hang Logic5.0
Based on 93 reviews
See all reviews
review us on
Denise Warren
5 days ago
It is truly wonderful to receive such thoughtful and prompt service when navigating unexpected challenges. Jacqueline's genuine care and assistance was appreciated. The extremely fast turnaround meant the Art Fair could be a successful event! Highly recommend.
Chris M
3 weeks ago
I chose the ceiling fixed Top rail in black with Perlon Twister hanging wires for an unobtrusive & floating effect & it is excellent! I found the recommended tiny fixing screws very difficult to use & opted for a larger size for use with the power drill & painted them black with a permanent marker pen. Hang Logic were very helpful & their service was excellent. Highly recommended! Added a larger, heavier frame & it easily took the extra weight.
Sherre DeLys
3 weeks ago
Jacqueline offers the kind of attention that comes from someone who thinks past the hardware to how it will work for your situation, and to the artwork getting to be seen the way it deserves. For example, we ordered components for a hanging system, expecting nothing more than a delivery. But before anything shipped, Jacqueline called to check the details of our job — she’d picked up that we'd missed a piece, and without that call we'd have found out mid-install. A second time, I rang to ask what components we'd need for an especially weighty picture; Jacqueline offered her professional advice on details I hadn't even thought to ask about. I highly recommend Jacqueline, Hang Logic, and the Artiteq System.
Sue McKay
2 months ago
Thrilled to finally have a rail system to hang artwork! Local business Hang Logic & installer Jono made it easy. They provided fast, professional service at a great price. It's easy to hang & rearrange work so I now have some of my dad's collection amongst mine in my tv-free art zone home 😊
Michelle Holian
3 months ago
Fantastic, easy purchasing process including professional consultation from Jacqueline, a range of product choices, and streamlined invoicing and payment. Installer Jono was on time, did a perfect job of installing 10 metres of rail and cleaned up the brick dust on completion. I had researched a range of products and providers but delighted with HangLogic. Will absolutely be back for more gallery rails when renovations are complete.

some of Our CLIENTs

VIC - The Lume Melbourne
NSW - German International School
QLD - Brisbane Convention and Exhibition Centre
ACT- Adina Hotel Canberra
WA - WA Maritime Museum
SA - Adelaide Festival Centre
Hassel Architects
COX Architects
ICON Constructions
Hilton Hotel
Shape Australia
Hansen Yuncken
Albany Entertainment Centre
Adelaide Oval
The University of Adelaide
Green Industries SA
Beach Energy
Naval Group
Finnlaysons Lawyers
Starcom
Bluethumb
St. Andrew Hospital
SA Police Academy
ANZ Bank
State Library Queensland

You may also like…

Spacer foam

Frame spacer

Price range: $1.36 through $1.62

Protects walls, less tilt

Select options This product has multiple variants. The options may be chosen on the product page

Related products

Close-up of a metal D-ring picture hanger held between fingers.

D-Ring Hanger

Price range: $0.25 through $2.64

Frame/stretcher D-rings, stable hang

Select options This product has multiple variants. The options may be chosen on the product page
Artiteq Frame Hanger for Use with Wood or Aluminium, provides fast, stable hanging

Frame Hanger for Use with Wood or Aluminium

Price range: $2.56 through $4.65

Frame/stretcher bracket: quick slide-in

Select options This product has multiple variants. The options may be chosen on the product page
Step-by-step illustration showing how to apply Artiteq Dibond Hangers to a panel using adhesive backing, available from Hang Logic

Dibond Hanger

Price range: $13.19 through $19.93
Select options This product has multiple variants. The options may be chosen on the product page
Zebra portrait mounted with ArtiTeq Back Frame kit and suspended by two clear perlon wires from a white Click Rail.

Back Frame Hanging System – Floating Mount Kit

$1.10

Clean float look for Dibond, acrylic, Forex prints

Add to cart
Two white ArtiTeq tilt reducers shown in a front-facing product render on a light background.
Tilt Reducer

$0.77

Add to cart