Clamp

ArtiTeq Clamp at a glance

ArtiTeq Clamps are the sturdier, more architectural way to hang rigid panels from a picture rail using vertically suspended steel cables.

If you’re displaying paper or photos in acrylic pockets, that’s typically handled with the ArtiTeq Display It Flex system. And if you want that same pocket-style display on wall-attached tension wires (instead of a picture rail), the ArtiTeq Display It Fixed Kit uses a top-and-bottom mounting kit with a tensioned wire setup.

• Clean, professional look – panels appear to float in place.
• Flexible layout – move a whole column along the picture rail and re-space panels without drilling new holes.
• Suits acrylic, signboards, foam-core, timber, metal and glass
• Choose the clamp size by panel thickness:
  • Clamp Single (2-4 mm) – 7805.001
  • Clamp Double (2-4 mm) – 7805.002
  • Clamp Single (3-6 mm) – 7805.030

Which clamp should I choose?

• Most common: Clamp Single (2-4 mm) for standard perspex pockets and sign panels.
• When you need a join/paired clamp: Clamp Double (2-4 mm).
• For thicker materials: Clamp Single (3-6 mm).

Setup tips

• Match the clamp to the panel thickness – don’t “force fit” it.
• Tighten evenly so the panel sits straight and doesn’t twist.
• If you are creating a grid, set your top points first, then align the rest by eye for a clean rhythm.

Available to buy from Hang Logic. If you tell us what material you are hanging and its thickness, we will point you to the right clamp (in about 30 seconds).