🔍
Zebra portrait mounted with ArtiTeq Back Frame kit and suspended by two clear perlon wires from a white Click Rail.
Rear view of aluminium back‑frame rails taped to a flat panel with wires routed through corner slots.
Back Frame Hanging System – Floating Mount Kit
Diagram with numbered red arrows showing how to measure equal top and side gaps before bonding ArtiTeq Back Frame rails to the panel.
Arrows show threading the cable through the rail channel then pulling down to tension the wire.
2mm Micro Grip Hook secures 2 mm sperlon cable inside the bottom back frame corner channel.
Close‑up of a hand pressing the ArtiTeq PBack Frame Flex Bumper to engage the height‑adjustment pin.
  1. Zebra portrait mounted with ArtiTeq Back Frame kit and suspended by two clear perlon wires from a white Click Rail.
  2. Rear view of aluminium back‑frame rails taped to a flat panel with wires routed through corner slots.
  3. Back Frame Hanging System – Floating Mount Kit
  4. Diagram with numbered red arrows showing how to measure equal top and side gaps before bonding ArtiTeq Back Frame rails to the panel.
  5. Arrows show threading the cable through the rail channel then pulling down to tension the wire.
  6. 2mm Micro Grip Hook secures 2 mm sperlon cable inside the bottom back frame corner channel.
  7. Close‑up of a hand pressing the ArtiTeq PBack Frame Flex Bumper to engage the height‑adjustment pin.

Back Frame Hanging System – Floating Mount Kit

$1.00

Back Frame Hanging System – Floating Mount Kit

Create a clean shadow‑float look for Dibond, acrylic or forex prints while adding strength and wall protection.

    • Two rail depths – 8 mm or 15 mm – choose the reveal that suits your artwork
  • 3M VHB tape pre‑applied – peel, stick, press – bubble‑free bond in seconds
  • Power Corners with built‑in levelling screws – micro‑adjust up to 6 mm for a dead‑level finish
  • Flex Bumpers keep panels parallel to the wall and stop tilt marks
  • 30 kg capacity when all four corners are used (TÜV certified)

Currently available on back order – stock lands December 2025. Please ignore price – it’s just a place holder.

📄 View brochure PDF

🛠️ View installation guide PDF

Read more – kit contents, installation and tips

Three hanging styles

  • Easy Hanging 1 – Fixed – rests on two wall screws
  • Easy Hanging 2 – Secured – top security clips + key for theft deterrence
  • Easy Hanging 3 – Flexible – hook onto picture‑rail wires for on‑wall height adjustment

What’s in the kit

Part Qty Specs
Back‑frame rails 2 × long, 2 × short Anodised aluminium, 8 mm or 15 mm profile
Power Corners 4 Integrated levelling screws
Flex Bumpers 4 10 mm diameter
3M VHB tape Factory applied 1 mm industrial grade

Installation – 4 quick steps

  1. Cut & clean the rails to panel size.
  2. Peel & press – position rails 100 mm from each edge, press for 10 seconds.
  3. Click in Power Corners – tighten levelling screws until perfectly flush.
  4. Choose Fixed, Secured or Flexible hanging style, then hang and admire the floating effect.

Best practice

  • Wipe panel backs with isopropyl alcohol before taping for maximum bond.
  • Use gloves when pressing VHB tape – body oils weaken adhesion.
  • For panels taller than 1.5 m, add a mid‑rail for extra rigidity.

Compatible walls & rails

  • Timber, masonry, drywall – use the correct plugs/screws.
  • Works with all ArtiTeq picture rails – Click Rail, Click Rail Pro, Top Rail, Shadowline and more.

Related products

Artiteq Frame Hanger for Use with Wood or Aluminium, provides fast, stable hanging

Frame Hanger for Use with Wood or Aluminium

Price range: $2.33 through $4.23
Select options This product has multiple variants. The options may be chosen on the product page
D-ring used to hang picture frames

D-Ring Hanger

Price range: $0.23 through $2.40
Select options This product has multiple variants. The options may be chosen on the product page
A clear zoom in picture of 2 tilt reducer.

Tilt Reducer

$0.70
Add to cart
Spacer foam

Frame spacer

Price range: $1.24 through $1.47
Select options This product has multiple variants. The options may be chosen on the product page
Zebra portrait mounted with ArtiTeq Back Frame kit and suspended by two clear perlon wires from a white Click Rail.
Back Frame Hanging System – Floating Mount Kit

$1.00